Reasons for CDR Report Rejection
In spite of the fact that a significant amount of time and attention was invested in the creation of the CDR report, it is generally rejected. One of the common reasons for CDR rejection is failing to follow the rules established by Engineers Australia. Even after committing a considerable amount of time and effort, your CDR report may still be rejected. This highlights the importance of adhering to the guidelines set in the MSA booklet.
When drafting your CDR, make sure you discuss everything in great detail and stick to the criteria provided in the MSA booklet. If you want your CDR to be approved, it must be of exceptional quality and meet all the standards mentioned in the MSA brochure. Only then will it be accepted. Failure to meet these standards is one of the frequent reasons for CDR rejection.
Putting together a CDR for the very first time might be complex and difficult. You are expected to provide a detailed account of your engineering skills and the job experience you have obtained. It’s essential to present this account in full to avoid common reasons for CDR rejection.
Engineers Australia uses the CDR report to evaluate migrant engineers. This report includes all the information, workshops, experience, and skills that an engineer must possess to be considered for migration. One of the key requirements for visa approval is demonstrating that you have the requisite engineering skills.
As a result, Engineers Australia evaluates the competence of engineers from a variety of engineering disciplines that are not part of the Washington Accord. However, despite a lot of work being put into the CDR, it is quite rare for the report to be rejected due to minor errors. These errors, which could be intentional or unintentional, are one of the common reasons for CDR rejection.
When applying for a visa, it is crucial to avoid these mistakes, as they can lead to CDR rejection. Understanding the reasons for CDR rejection and taking steps to avoid these errors can significantly increase the chances of your CDR being accepted.
Table of Content
- Introduction
- Reasons behind the rejection of the CDR report
2.1 Word Counts Requirement
2.2 Poor report-writing
2.3 Plagiarized Content
2.4 Not following the MSA booklet guidelines
2.5 Career Episode Content
2.6 Irrelevant documents
2.7 Improper Language
2.8 Substandard demonstration of soft skills - Overview of Reasons for CDR Report Rejection
- Why choose CDR writers to avoid Rejection?
- FAQs
Reasons behind the rejection of the CDR report
1. Word Counts Requirement
While developing a CDR report, individuals usually do not pay attention to the word count. The ideal number of words in the report is between 1000 and 2500. Writing too little material in your report may mean that you do not have much experience to talk about. However, wordy reports with unnecessary information will lead to CDR report rejection.
2. Poor report-writing
Engineer Australia has provided a generic template that needs to be followed while writing a report. The template walks you through a step-by-step process that starts with personal information and ends with the actual CDR report. The candidate must be attentive to this format and prepare their report accordingly. Any unwanted alteration to the steps can also be the reason for your CDR report rejection.
3. Plagiarized Content
This is the most common reason for CDR report rejections. You should never copy work from other sources. The report is meant to be exclusively your own. Whether it be intentionally or unintentionally, your report, including the work of other people, will instantly result in the rejection of your CDR report.
4. Not following the MSA booklet guidelines
The MSA has formulated a booklet that clearly illustrates the standard approach to be followed while building your CDR report. It has explained in detail the occupational categories, requirements, how to apply for the EA, principles required to be met to apply for the EA, and most importantly, the mechanism to build the CDR report. Everyone must go through the MSA booklet thoroughly and prepare the report accordingly. Failing to do so is also one of the main reasons why such a huge number of candidates get their CDR reports rejected.
5. Career Episode Content
The career episode is the section in your report that explains why you are the right candidate for the position you are applying for. It has an essay-like format that begins with an introduction, followed by a background, and then your project. Many candidates make the mistake of using a lot of technical terms in this section only to get their CDR report rejected. Here, it would be best if you highlighted your venture in that particular project. You need to focus on your performance and not the work your team did. Moreover, candidates have used the same activity for two career episodes, which is also why the CDR gets rejected so often.
6. Irrelevant documents
When you prepare a CDR document, the candidate must be truthful. You should be ready with your proof and documents to convince the EA that the report you are providing is authentic. A false mention of the projects you never were a part of, deceptive evidence, and a false report is an absurd act and is also a sign of disrespect. This will not only cause the rejection of the CDR but also ban the candidate from any further applications as well.
7. Improper Language
Proper Australian English and grammar are vital components of the CDR report. It will get you positive feedback and improve your chances of being accepted, as the EA will better understand your report. In addition to that, you should refrain from deviating from the topic of the report and adding unnecessary information. The CDR report should also be free from profane words and phrases.
8. Substandard demonstration of soft skills
We have found a large number of applicants using excessive technical details and insufficient display of their understanding of conceptual terms and the engineering discipline required to get accepted. You must be able to showcase your problem-solving skills through the measures you took to solve the problem that arose while working on your project. It will make your report stronger. Poor presentation of your soft skills makes you appear incompetent and weak in your application. You may get your CDR report rejected.
Overview of Reasons for CDR Report Rejection
In summary, the rejection of CDR reports can be attributed to issues like not providing enough evidence of engineering competency, not following the guidelines provided by Engineers Australia, including irrelevant or insufficient information, or not demonstrating the required level of English proficiency. It is important to carefully review the guidelines, provide detailed evidence of your engineering experience, and ensure that your report is well-structured and addresses all the necessary criteria. Taking the time to thoroughly prepare and double-check your CDR report can help increase the chances of a successful assessment.
Why choose CDR writers to avoid Rejection?
We’re really good at writing CDR reports, which is what Engineers Australia needs to approve engineers. We’ve been doing this for a long time, and we know how to avoid mistakes that might get your report rejected. Our team is huge, with over a thousand experts who are great at different types of engineering. We cover all the branches of engineering, and we have writers who are experts in each one. If you need help writing your CDR, we can tutor you and review your work to make sure it’s good enough. So, it’s a good idea to hire us if you want to make sure your CDR gets approved by Engineers Australia.
Looking for expert CDR Writer for Engineers Australia?
CDR reports, resumes, VETASSESS, and RPL applications can be challenging to prepare. Our team of professionals has effectively helped clients obtain approval with professional services that address all of these needs.
FAQs
Q. Why do CDR reports get rejected?
CDR reports may get rejected for various reasons, such as not providing enough evidence of engineering competency, not following the guidelines provided by Engineers Australia, including irrelevant or insufficient information, or not demonstrating the required level of English proficiency.
Q. What can I do to avoid CDR rejection?
To avoid CDR rejection, it is important to carefully review the guidelines, provide detailed evidence of your engineering experience, and ensure that your report is well-structured and addresses all the necessary criteria. Taking the time to thoroughly prepare and double-check your CDR report can help increase the chances of a successful assessment.
Note: About CDR Samples
Q. Can I appeal the decision if my CDR report is rejected?
Yes, if your CDR report is rejected, you can appeal the decision. Engineers Australia will provide feedback on areas that need improvement, and you can work on addressing those areas and reapply in the future.
Q. How long does the CDR assessment process take?
The duration of the assessment process can vary depending on individual circumstances. It typically involves a review of your engineering experience and may take several months to complete.